KIESEL flexible impeller pumps

Dry, self priming pump combining the characteristics of a rotary pump and a positive displacement pump. 

Food industry, chemical industry, workshop, sewage –
electroplating, beverage industry, agriculture – garden

Sizes

IP01 – up to 1,000 LPH

IP02 – up to 2,000 LPH

IP03 – up to 5,000 LPH

IP10 – 2,500 to 10,000 LPH

IP15 – 500L to 15,000 LPH

IP20 – 2,000 to 20,000 LPH

IP30 – 5,000 to 30,000 LPH

• Note that all speeds are excluding head pressure, product and resistance; actual speeds will be affected by these. Use as a guide line only.

OPTIONS INCLUDE

• bypass
• dry run sensor
• radio remote control
• cabled remote control
• stone trap
• replacement impeller

KIESEL Impeller pumps exhibit a continuous pulsation-free
pumping flow. The pumping direction can be reversed without
difficulty. Thereby, the impeller pumps efficiency does not
change.
The KIESEL Impeller pumps achieve the best efficiency at the
speed of between 500 and 1500 rpm. Higher revs strongly
decrease the life span of the impeller. At lower speed efficiency
drops drastically, because of the „slip“ between the impeller
and the casing.
The number of pump revolutions depends strongly on the
homogeneity, viscosity and abrasiveness of the pumping
agent.
The impeller pumps are self-lubricating. Given that, without
lubrication between the impeller and housing, frictional heat
develops fast. The impeller pump may run unlubricated, but
only briefly. The suction process must be completed within 30
seconds. After the moistening of the impellers with the
pumping medium, a longer unlubricated operation is possible.

Application Area

The KIESEL Impeller pump is the durable universal pump
for the sporadic, alternating operation, for the priming and
pumping of contaminated high and low viscosity liquids.
As a transportable pump with flexible tubes, the KIESEL Impeller
pump is frequently used, because the pump also primes and
pumps air through the empty hoses.